Well, I channeled Cleo, of Busy Lizzy, a professional finisher, who works on multiple ornaments simultaneously. I saw her in her workroom during a Zoom meeting working on at least 6 ornaments. I have all the supplies on my dining room table but am working on a tray table in the living room going step by step. My husband is very tolerant of the mess. One more odd shaped ornament after these and then I will clear the table for Christmas.
Step 1. Make copies of the ornaments at 100 & 135%. Two diamonds are the same size. The Winter Sleigh is a painted canvas by Alice Peterson that ANG Main Line Stitchers discussed using 2 stitch guides in 2019 just before the shut down, the 2 large diamonds are by Kurdy Biggs from Needlepoint Now November/December 2015 issue that was a 2018 project with ANG Keystone Garden chapter that I finished in 2019, and the small diamond is by Vicky Witterschein which was stitched during a Zoom class in 2021 with my EGA Brandywine Chapter.
Step 2. Cut out paper templates and cut ornaments out of canvas allowing about a half-inch larger than the design.
Step 3. Using the larger of the 2 templates, trace and cut out fabric backs. All will get the new silver fabric and was an opportunity to use my Karen Kay Buckley micro serrated scissors (which stops edges from fraying). The right tool for the job helps.
Step 4. Cut the Skirtex and fusible web slightly smaller than front design for the fabric backing.
Step 5. Iron the fabric backing onto the Skirtex with fusible web (like that better than glue-much neater-as long as I make fusible web smaller than the smallest side).
Step 6. Using the exactly sized template, cut a piece of magazine board.
Step 7. For the sleigh, I cut 4 layers of felt smaller than the magazine board to make it puffy, tacked the felt in place, placed the magazine board on top of the felt. There are 2 layers of felt on the 3 diamond ones.
Step 8. I found my Wonder Clips and used them to hold the folded-over canvas while I laced the canvas side to side with invisible thread. One spool has 2,200 yards. I’ll never need another!
Step 9. Attach hanger for the 3 diamonds. I used a Kreinik #16 Braid which I tied into the felt to start and finish but run it up through the canvas and back down right in the center. Very easy! I am reminded of a Brian Regan joke sarcastically saying “you’re breaking some new ground there, Copernicus”. It’s probably not a new way to add a hanger but I can’t recall seeing it suggested anywhere.
Step 10. Get my Thimble Pack out because my index and middle fingers only made it through 2 ornaments. Using a small Crewel needle pushing through Skirtex and sometimes magazine board was tough on my fingers!
Step 11. I sewed a cord on the edge for the sleigh simultaneously with the backing but cord is not needed on the others. The others look fine with just raw edge I guess because the design has some open canvas. I’m very happy with the results and see improvements with each one. Reminds of the old adage, “Practice makes perfect”. I still prefer to spends the hours stitching.
This is the third of the Christmas Diamonds by Kurdy Biggs from the Needlepoint Now November/December 2015 issue.
This has the same colors as the first diamond and is also on a white canvas with silver sparkles. I added some small (3mm) silver bugle beads and did the beads a little differently than diagrammed. The same size beads are inside the border Jessicas.
I finished the Jessica border during my last Saturday afternoon with my ANG Main Line Stitchers chapter (always the 4th Saturday at Starbucks on Lancaster Ave in Wayne, PA from 11 am to 3 pm).
No changes to the threads or beads from the first diamond. The threads are Kreinik #4 Braid 1432, Entice E248, Silk Lame Braid Petite SP118, Splendor S988, and Treasure Braid TR277. The beads are Miyuki Delica Beads 15/0 DBS0166 and Sundance Beads Size 11 and Size 14/15 Color 327P; the beading thread is from Sundance too in Teal and Turquoise colors.
I have enough thread and beads to do the third but I’m getting ready to take a couple of classes. So, I will probably not stitch the second diamond. But, I would like to see them all stitched. And, the finishing should be done at the same time. What to do!?!
Last year, my ANG Keystone Garden chapter offered Christmas Diamonds as a project. I hadn’t done a piece by Kurdy Biggs before. So, I decided to do it but didn’t get to it until now. There are 3 different designs in the Needlepoint Now November/December 2015 issue.
This is the first diamond with my colors on a white canvas with silver sparkles. I added some small (3mm) silver bugle beads and did the beads a little differently than diagrammed. And, I used smaller size beads inside the border Jessicas because the 11 beads overcrowded the Jessicas. The smaller beads fit much better. For alternating Jessicas, I used 5 dark sead beads and then 4 light Delica and a 5th dark sead bead on top. I finished the beads in the border during my Saturday afternoon with my ANG Main Line Stitchers chapter (always the 4th Saturday at Starbucks on Lancaster Ave in Wayne, PA from 11 am to 3 pm).
The threads are Kreinik #4 Braid 1432, Entice E248, Silk Lame Braid Petite SP118, Splendor S988, and Treasure Braid TR277. The beads are Miyuki Delica Beads 15/0 DBS0166 and Sundance Beads Size 11 and Size 14/15 Color 327P; the beading thread is from Sundance too in Teal and Turquoise colors.
Melitastitches4fun's Blog 
Filed under: ANG Keystone Garden Chapter, ANG Main Line Stitchers Chapter, Brandywine Chapter, Christmas Diamonds by Kurdy Biggs, Embroidery Guild of America, Finishing, General comments, Tree Ornament Vicky Witterschein, Winter Scene Sleigh
Well, I channeled Cleo, of Busy Lizzy, a professional finisher, who works on multiple ornaments simultaneously. I saw her in her workroom during a Zoom meeting working on at least 6 ornaments. I have all the supplies on my dining room table but am working on a tray table in the living room going step by step. My husband is very tolerant of the mess. One more odd shaped ornament after these and then I will clear the table for Christmas.
Step 1. Make copies of the ornaments at 100 & 135%. Two diamonds are the same size. The Winter Sleigh is a painted canvas by Alice Peterson that ANG Main Line Stitchers discussed using 2 stitch guides in 2019 just before the shut down, the 2 large diamonds are by Kurdy Biggs from Needlepoint Now November/December 2015 issue that was a 2018 project with ANG Keystone Garden chapter that I finished in 2019, and the small diamond is by Vicky Witterschein which was stitched during a Zoom class in 2021 with my EGA Brandywine Chapter.
Step 2. Cut out paper templates and cut ornaments out of canvas allowing about a half-inch larger than the design.
Step 3. Using the larger of the 2 templates, trace and cut out fabric backs. All will get the new silver fabric and was an opportunity to use my Karen Kay Buckley micro serrated scissors (which stops edges from fraying). The right tool for the job helps.
Step 4. Cut the Skirtex and fusible web slightly smaller than front design for the fabric backing.
Step 5. Iron the fabric backing onto the Skirtex with fusible web (like that better than glue-much neater-as long as I make fusible web smaller than the smallest side).
Step 6. Using the exactly sized template, cut a piece of magazine board.
Step 7. For the sleigh, I cut 4 layers of felt smaller than the magazine board to make it puffy, tacked the felt in place, placed the magazine board on top of the felt. There are 2 layers of felt on the 3 diamond ones.
Step 8. I found my Wonder Clips and used them to hold the folded-over canvas while I laced the canvas side to side with invisible thread. One spool has 2,200 yards. I’ll never need another!
Step 9. Attach hanger for the 3 diamonds. I used a Kreinik #16 Braid which I tied into the felt to start and finish but run it up through the canvas and back down right in the center. Very easy! I am reminded of a Brian Regan joke sarcastically saying “you’re breaking some new ground there, Copernicus”. It’s probably not a new way to add a hanger but I can’t recall seeing it suggested anywhere.
Step 10. Get my Thimble Pack out because my index and middle fingers only made it through 2 ornaments. Using a small Crewel needle pushing through Skirtex and sometimes magazine board was tough on my fingers!
Step 11. I sewed a cord on the edge for the sleigh simultaneously with the backing but cord is not needed on the others. The others look fine with just raw edge I guess because the design has some open canvas. I’m very happy with the results and see improvements with each one. Reminds of the old adage, “Practice makes perfect”. I still prefer to spends the hours stitching.
Step 11. Hang and enjoy the ornaments!!